Do you feel like you're being watched? Maybe you just want to make sure your privacy is protected. Read the full article here:
  1. Do a physical search of the premises.
    This involves a slow, meticulous sweep of the room or building you suspect is wired.
  2. Listen as you walk the entire room quietly.
    Many small, motion-sensitive cameras make an almost inaudible click or buzz when they operate.
  3. Turn off the lights and look around for tiny red or green LED lights.
    Some microphones have "power on" indicator lights, and if the person who sets it up is careless they may fail to cover or deactivate this feature.
  4. While the lights are off, grab a flashlight and carefully examine all mirrors.
    These can be made transparent from one side so that a camera can see through, but they rely on the observer's side being darker than the area observed in order to keep the other side of the mirror reflective.
  5. Search for pinhole cameras in the dark.
    A pinhole camera might have a charge-coupled device (CCD) sitting behind a tiny opening in a wall or object. Get an empty toilet paper tube and a flashlight. Put the tube over one eye like a telescope and close your other eye. As you sweep the flashlight over the room, pay attention to any small glimmers that reflect back at you.
  6. Buy an RF signal detector or other bug detector.
    If you seriously believe you are being spied on, buy an RF (radio frequency) detector and do a sweep of your room, building, or home. These portable devices are small, simple to use, and fairly inexpensive. However, there are bugs that use multiple frequencies in rapid sequence called "spread spectrum" that an RF detector will not pick up. These bugs are used by professionals and require a spectrum analyzer and an experienced technician to find.
  7. Use your cell phone to pick up an electromagnetic field.
    Place a call on your cell phone, then wave the device around where you think there might be a camera or microphone. If you can hear a clicking noise on the call, it means your phone might be interfering with an electromagnetic field.